TYGRIS Clear Polymer Chain Lubricant - R228

TYGRIS Clear Polymer Chain Lubricant is for use on chains and sprockets, pins and bushes where its anti-fling performance is important and where a clear invisible film is necessary for cosmetic reasons. It penetrates into the chain, depositing a film of extreme pressure additives and polymers which will withstand pressure washing.

Benefits:

• Fortified with PTFE for improved load resistance;

• Good thermal stability;

• Extreme pressure additives;

• Will not fling off; Extends chain life;

• Resists and prevents corrosion;

• Clean to use;

• Penetrates deep into chain links;

• Withstands pressure cleaning

Consult the safety data sheet prior to use - suitable Personal Protection Equipment should be worn. Shake can well. Spray onto surface from 10-20cm, allow a few seconds for the solvent to disperse and re-start machinery. Dispose of used aerosols in line with local and national regulations.

• Appearance: Slightly amber high pressure spray drying to a thick sticky stringy polymer film

• Odour: Oily solvent

• Contents: Blend of refined mineral oils, tackifier, extreme pressure additives, polyisobutylenes, PTFE and hydrocarbon propellants. No silicones or chlorinated solvents

• Flash point: <0c

• Solubility: Insoluble in water

• Temperature range: -50 to 150c continuous, 300c intermittent

• Relative density: 0.780

• Flammability: Extremely flammable

• Storage: Below 50c